ACRITECH™ is specially designed as a colored top coating over Rubber Coat™ and Mine Coat™. It comes in four standard colors, but special order colors are available as well. Please see the walkable deck system ACRITECH™ cures to give a flexible colored surface coating and is recommended as a top coat over Rubber Coat or Mine Coat. It is a water resistant and chemical resistant polymer modified acrylic water-based coating. It is applied as a single component with brush, roller, or airless sprayer. ACRITECH™ cures to give a flexible colored surface coating. Applications include our walkable deck system and colored top coating for Rubber Coat or Mine Coat in corrosion protection applications.


Product Details:

Physical Properties (liquid)
  • Specific gravity: 1.2
  • VOC: Contains no solvents
  • Color: multiple colors available
  • % Solids (wt): 65-68
  • Viscosity, Cps Brookfield: 5000-8000
  • pH: 8-11
Performance (cured membrane)
  • Chemical Resistance: Most organic and inorganic solutions including petroleum hydrocarbon products. Consult Chemical Resistance chart for further information.
  • Impact Resistance CGSN 37-GP-56 @ 73°F and Water tightness after impact: 168 in-lbs and Pass (no leakage observed)
  • UV Resistance ASTM G155 250 hrs.: No deterioration of the film, >90% retention of original tensile strength
  • Tensile Strength, ASTM D412: 1200 psi
  • Adhesion to Concrete ASTM C 907: 450 psi
  • Low temperature mandrel @59°F: Passed
  • Hardness, Durometer Type 00, Type A, Type D: 80-85; 65-67; 18-20
  • Elongation – >200%
Cured Membrane Thickness (mils) – Coverage (gallons/100 sq. ft.):

  • 20 – 2
  • 40 – 4
  • 60 – 6
  • 80 – 8
Application & Limitations
ACRITECH™ is a water based and environmentally friendly product which must be applied when ambient temperature is above 40°F. For best results, ACRITECH™ should be applied as a surface coating over PermaDri’s Rubber Coat™ or Mine Coat™. Application thickness of these products will vary by end-use and color selected (lighter colors may require a heavier application). For best results, apply in multiple thin coats. Typically, ACRITECH™ will dry to the touch in several minutes and is largely cured within 48 hours. The final cured properties may, however, not be realized for 28 days. ACRITECH™ is unaffected by a range of acids, alkalis, and waterborne salts and is resistant to biological deterioration. ACRITECH™ is not recommended where the surface is continually submerged in water, such as ponding water.
Shelf life of ACRITECH™ stored in its original unopened container is 12 months. Normal stirring upon opening is recommended. ACRITECH™ should not be stored below 50°F or above 90°F. ACRITECH™ contains no solvents and has a flash point greater than 356°F.

Keep out of the reach of children.  For industrial use only. MSDS/Factsheet: Download here